Mapping the SISO module of the Turbo decoder to a FPFA

In the CHAMELEON project a reconfigurable systems-architecture, the Field Programmable Function Array (FPFA) is introduced. FPFAs are reminiscent to FPGAs, but have a matrix of ALUs and lookup tables instead of Configurable Logic Blocks (CLBs). The FPFA can be regarded as a low power reconfigurable accelerator for an application specific domain. In this paper we show how the SISO (Soft Input Soft Output) module of the Turbo decoding algorithm can be mapped on the reconfigurable FPFA

Reducing Library Characterization Time for Cell-aware Test while Maintaining Test Quality

Cell-aware test (CAT) explicitly targets faults caused by defects inside library cells to improve test quality, compared with conventional automatic test pattern generation (ATPG) approaches, which target faults only at the boundaries of library cells. The CAT methodology consists of two stages. Stage 1, based on dedicated analog simulation, library characterization per cell identifies which cell-level test pattern detects which cell-internal defect; this detection information is encoded in a defect detection matrix (DDM). In Stage 2, with the DDMs as inputs, cell-aware ATPG generates chip-level test patterns per circuit design that is build up of interconnected instances of library cells. This paper focuses on Stage 1, library characterization, as both test quality and cost are determined by the set of cell-internal defects identified and simulated in the CAT tool flow. With the aim to achieve the best test quality, we first propose an approach to identify a comprehensive set, referred to as full set, of potential open- and short-defect locations based on cell layout. However, the full set of defects can be large even for a single cell, making the time cost of the defect simulation in Stage 1 unaffordable. Subsequently, to reduce the simulation time, we collapse the full set to a compact set of defects which serves as input of the defect simulation. The full set is stored for the diagnosis and failure analysis. With inspecting the simulation results, we propose a method to verify the test quality based on the compact set of defects and, if necessary, to compensate the test quality to the same level as that based on the full set of defects. For 351 combinational library cells in Cadence’s GPDK045 45nm library, we simulate only 5.4% defects from the full set to achieve the same test quality based on the full set of defects. In total, the simulation time, via linear extrapolation per cell, would be reduced by 96.4% compared with the time based on the full set of defects

Integrating VLIW processors with a network on chip

Networks are a becoming a necessity to easily integrate multiple processors on a single chip. A crucial question here is whether it is good enough to reason about statistical performance as opposed to hard real-time performance constraints. Today’s processors often do not allow software design for hard real-time systems, caused by the design of the bus- and/or memory interfaces, thereby necessitating elaborate performance analysis through simulation.\u3cbr/\u3e\u3cbr/\u3eIn this presentation I will indicate what options a processor designer has, using Silicon Hive processor design tools, in specifying the interfaces and local memory sub-system in a processor. It allows a multitude of communication options to build either type of system: statistically bound or hard real-time bound performance.\u3cbr/\u3e\u3cbr/\u3eAdditionaly I will describe the multi-processor simulation and prototyping environment and touching on the processor design methodology

FADIC:Architectural synthesis applied in IC design

\u3cp\u3eThis paper discusses the design of a chip using architectural synthesis. The chip, FADIC, is applied in Digital Audio Broadcasting (DAB) receivers. It shows that architectural synthesis tools are used for the design of new complex applications and that it supports the evolutionary development of challenging applications like DAB. It was found that the success of such tools in the design community depends on the way user interaction is supported and stimulated. Fast and accurate feedback from the synthesis tools in combination with a rich set of hints for the compiler to guide the architecture exploration are the key issues. It is shown that short time to market is possible for implementations which are an order of magnitude more efficient than alternative implementations on commercially available DSP processors.\u3c/p\u3